Optiflex Sheet

It is an elastomeric rubber based insulation material in the form of sheet with closed cell structure. It is manufactured to be used for air conditioning, heating and cooling systems. It can be faced with aluminium foil and can be self-adhesive.

Download Product Brochure

Find Closest Dealer

Application Area

It is used on the exterior surfaces of the ducts and large diameter pipe lines in the heating, cooling and air conditioning systems for thermal insulation and condensation control purposes.
For the spaces where there is heat transfer by radiation, using products faced with aluminium foil is recommended.
The sheets are adhered to the duct surface by using a special adhesive that Izocam suggests.
Joints should be tightly sealed and they should be covered with insulation tape afterwards if necessary.
Taping should not result in thickness loss. For the application of self adhesive sheets there is no need to use any adhesive.
The application should be protected against distruption and rupture. For the applications exposed to the sun, definitely a protective coat or a protective paint should be used.
For indoor spaces getting day lighting, the products faced with aluminium foil can be used without requiring any coating against UV affect. Fort the outdoor applications, the surface should be coated within 5 days.

Certificates

Material Safety Forms

İZOCAM ELASTOMERIC RUBBER MSDS

Technical Specifications

Properties	Symbol	Unit	Description									Tolerance		Standard
Material	-	-	Elastomeric Rubber Foam									-		TS EN 14303
Material Type	-	-	Optiflex Sheet		Optiflex AL			Optiflex KY		Optiflex AL-KY		-		-
Facing	-	-	Unfaced		Al-foil (18µ, reinforced, non-combustable)			Self adhesive film		Al-foil, Self adhesive film		-		-
Reaction to fire	-	-	E									-		TS EN 13501-1
Max. Service Temperature	-	°C	-50 / 105					-50 / 85				-		-
Lenght	l	mm	3000 ≤ L ≤ 60000									± 1,5 %		EN 822
Width	w	mm	1000 - 1200									± 2 %		EN 822
Thickness	t	mm	6 ≤ d_D≤ 32					6 < d_D≤ 50 *				d_D≤ 6	±1,0	EN 823
												6<d_D≤19	±1,5
												d_D> 19	±2,0
Declared Thermal Conductivity	T	°C	-20	0		20	40		60		80	-		TS EN 12667
	λ_D	W/m.K	0,031	0,034		0,036	0,037		0,038		0,043
Water Vapor Diffusion Resistance Factor	µ	-	≥ 5000									-		EN 12086
Resistance to Olis	-	-	Good									-		-
Resistance to Weather Conditions	-	-	Good									-		-
Flexibility	-	-	Excellent									-		-
Fungal Growth	-	-	None									-		-
Packaging Material	-	-	PE Film									-		-
Other Information	It is appropriate to DIN 1988/7 relating to corrosion. Product contains less than 0,2 % ammonium and less than 0,05 % chlorine ion that dissoluted in water.

* Standard product dimensions dDxl (mm): 6x36000, 9x24000, 13x8000, 19x12000, 25x9000, 32x7000, 40x6000, 50x5000; b (mm):1000