Izocam Peflex is a polyethylene foam material that has closed cell structure. It is manufactured to be used for air conditioning, cooling, thermal insulation and condensation control in solar energy systems.
It is used in cold water systems; solar energy systems; fittings, air conditioning and cooling members of the large diameter pipes; systems functioning with dual temperatures; ducts and tanks; at the exterior surfaces of the ducts and large diameter pipe lines, for thermal insulation and condensation control purposes. For the spaces where there is heat transfer by radiation, using products faced with aluminium foil is recommended. The boards are adhered to the duct surface by using a special adhesive that Izocam suggested. Joints should be tightly sealed and they should be covered with insulation tape afterwards if necessary. Taping should not result in thickness loss. The application should be protected against distruption and rupture. For the applications exposed to the sun, definitely a protective coat or a protective paint should be used. For the outdoor applications, the surface should be coated within 5 days. For the application of self adhesive boards there is no need to use any adhesive. Aluminium foil coating increases the vapour resistance and impact resistance of the material. Since it prevents the sun rays it protects the material against UV and prolongs its life. There is no need to use protective coating or painting for indoor spaces getting natural sun. Metallized film coating is a polyethylene material with high density that is preferred since it is shiny and has a similar apperance with aluminium foil. For the application of self adhesive sheets there is no need to use any adhesive. It should not be exposed to direct sun light and it should be preferred for indoor spaces.