Manto Stone Wooll R+
Manto Stone Wooll R+

Manto Stone Wooll R+

It is an unfaced stone wool boards that is produced specially with respect to TS EN 13500 standards. It is utilized at external thermal insulation composite systems for thermal insulation, sound insulation and fire safety purposes.

Download Product Brochure
İzocam Adres Find Closest Dealer

Application Area

  • First of all, the surface to be used in the application should be checked to ensure that it is smooth and dry.
  • If the surface is rough and with scrapes it should be cleaned by brushing.
  • Unevenness, major defects and cracks should be repaired by means of plaster.
  • The boards can be adhered to the surface using cement based fixing mortar by different methods.
  • The boards should be laid down without any gap side by side on the wall surface shortly after spreading fixing mortar over the boards.
  • The adhesive should not be spread near the edges of the board in order to prevent the adhesive getting into the joints.
  • The boards are laid down in an alternating pattern at the facades and the corners.
  • When the fixing mortar is completely dry (approximately after 24 hours) the anchoring process can be started. Special insulation fastening anchors are used which are chosen with respect to the wall pr
  • Tiled surfaces or surfaces with old plaster are not suitable for anchoring.
  • After anchoring process, reinforced layer is formed.
  • Cement based undercoat plaster is applied to the surface by trowel.
  • Afterwards, an alkali resistant, glass fiber based reinforcement mesh is placed on top by trowel in such a manner that the edges are overlapped by 10 cm.
  • Consequently, second coat plaster is applied on the mesh and the reinforced layer comes to an end. When the reinforced layer is completely dry; permeable, solvent-free decorative cladding material wit
  • Exterior cladding thickness and the quantity to be applied depend on the plaster type. Different surface forms can be achieved on the finishing plaster by different polishing methods.
  • This application is correct in terms of that it removes thermal bridges by insulating wall surfaces as well as it protects the building from atmospheric conditions and prevents physical changes which

Material Safety Forms


Technicial Specifications